Circuit Technology

The Solder Training Authority.

Need answers? Call Now.
(919) 552.3434


Circuti Technology Inc | Solder Training Kits

Lead Free and Lead bearing hand solder training kits configured and approved by IPC for use in the IPC training programs. Workbooks to complement the solder training kits are also available for each of the solder training kits we sell. TERMINALS NOW Available!!

Solder Training KITS

BOM Skills Evaluation Board

This board is designed to evaluate assemblers and potential new hires for their basic soldering and electronic assembly skills. The skills needed to complete this circuit will demonstrate the worker's aptitude for high precision work with a combination of Through Hole Technology and Surface Mount Devices as well as critical thinking and attention to detail. All components are individually packed in their own clearly labeled bag. These labels include the exact location that each component should be installed on the board. The use of the blue LED in the circuit was very carefully considered during the design process. The high voltage required for the blue LED to light up can only be sent through the test board if the majority of components have been placed in the correct location and to the correct polarity. This gives the trainer a quick and simple method for testing if the board has been assembled correctly. The trainer simply has to install the AAA battery into the board, and if it was correctly assembled the LED will light up.

Soldering Kit Components
Part Description & Board Location

  • PCB
  • Blue 30AWG teflon jacket mod wire
  • HOLDER BATTERY 1CELL AAA PC MNT BATT1
  • 0805 resistor 100k Ohm C1
  • 0805 Capacitor C12
  • 0805 Resistor 100k Ohm (piggyback mod) C12
  • Ceramic Capacitor 50V 47pF NPO 5.00mm C2
  • 5 mm Al electrolytic radial cap 22uf C3
  • 1206 Capacitor C4
  • 0603 Capacitor C5
  • 0402 Capacitor C6
  • LED BLUE CLEAR 5MM ROUND T/H D2
  • DIODE GEN PURP 1KV 1A DO41 D3
  • 14DIP IC1
  • Hdr RA 3 Ckt 3.96mm Pitch Sn J1
  • CONN HEADER VERT 10POS GOLD J2
  • 100uH radial ferite inductor L1
  • BC557BTF TRANS PNP 45V 0.1A TO-92 Q1
  • 2N3904BU TRANS NPN 40V 0.2A TO-92 Q2
  • Axial Metal film resistor 210Ohm R1
  • 0805 resistor 100k Ohm R12

Cost for solder training kit

1 kit $59.00 per

CTI-SMT Bulk Package Surface Mount Rework and Repair Kit

Beginners will find this soldering kit offers a wide variety of the common and some not so common surface mount devices. This SMT soldering kit will familiarize the student with component placement, polarity recognition and soldering techniques. Experienced solder-ers will be able to refine and demonstrate their expertise.

The board is .062" thick, HASL finish with double sided metallization with duplicate land patterns on the secondary side.

Soldering Kit Components
Component Type & Number of Components

  • 1206 Resistors/Capacitors 8
  • 0805 Resistors/Capacitors 10
  • 0603 Resistors/Capacitors 17
  • 0402 Resistors/Capacitors 15
  • Small Outline Transistors (SOT 23) 8
  • 14 Pin SOIC (50 mil pitch) 2
  • 20 Pin SOICW (50 mil pitch) 2
  • PLCC 28 (J Leads) 2
  • PLCC 68 (J Leads) 2
  • QFP 100 (25 mil pitch) 2
  • QFP 160 (25 mil pitch) 2
  • TQFP 100 (20 mil pitch) 2
  • TSOP 32 (20 mil pitch) 2
  • C Case Tantalum Capacitors 5
  • QFN-24 2

Cost for solder training kit SMT

No orders for less than 10 of these kits will be accepted.

10-50 $55.00 per
51+ $45.00 per

Optional: We offer a SMT Rework student training guide to accompany this soldering kit. This is a 30 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding), acceptance criteria as defined by IPC, product classifications, introduction to soldering, chip component ,SOIC, QFP and JLEAD removal/replacement along with tip selection, tip care and component identification and polarity recognition. A course evaluation and contact form are including as well to give the instructor feedback on this program. Sample page from guide.

1-50 $50.00
51+ $45.00

CTI-SMT-2 Individual Package Surface Mount Rework and Repair Kit

Kit Coming soon

Cost: (minimum order 5 kits)

1 - 49 $55.00 per
50-99 $45.00 per
100+ $40.00 per

Optional: We offer aSMT student training guide to accompany this soldering kit. This is a 30 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding). Component Identification, SMT procedures and other related information included as well as a course evaluation form to allow student feedback about your solder training program.

1 - 49 $35.00
50-99 $30.00
100+ $25.00

CTI-JSTD IPC-JSTD-001 Soldering Kit

IPC Certified JSTD-001 Solder Training Kit. Kit includes all required components for JSTD-001 Certified IPC Specialist training.
Parts packaged in ESD protective packaging to promote proper ESD prevention procedures.
Enough components to complete the two circuit boards, one for practice and skills development and one for certification.

Component Type / QTY

  • BOARD 2
  • Resistor 1/4 WATT 4
  • T05 TRANSISTOR 4
  • TRANSISTOR STANDOFF 4
  • DIODE 4
  • CAPACITOR 4
  • CAPACITOR STANDOFF 4
  • 16 PIN DIP 4
  • 0805 RESISTOR 4
  • 1206 RESISTOR 4
  • 1206 CAPACITOR 4
  • 1206 MELF DIODE 4
  • SOIC 14 2
  • QFP100 14x20 2
  • PLCC 20 2

Cost: (minimum order 5 kits)

1 - 49 $35.00 per
50-99 $32.00 per
100+ $28.00 per

Optional: We offer a JSTD-001 student training guide to accompany this soldering kit. This is a 20 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding). All IPC test answer sheets and practice questions along with workmanship evaluation forms and course evaluation are all included.

1-49 $45.00
50-99 $30.00
100+ $25.00

CTI-JSTD-LF IPC-JSTD-001 Lead Free Soldering Kit

IPC Certified JSTD-001 Solder Training Kit. Kit includes all required components for JSTD-001 Certified IPC Specialist training.
All parts and board lead free.
Parts packaged in ESD protective packaging to promote proper ESD prevention procedures.
Enough components to complete the two circuit boards, one for practice and skills development and one for certification.

Component Type / QTY

  • BOARD 2
  • Resistor 1/4 WATT 4
  • T05 TRANSISTOR 4
  • TRANSISTOR STANDOFF 4
  • DIODE 4
  • CAPACITOR 4
  • CAPACITOR STANDOFF 4
  • 16 PIN DIP 4
  • 0805 RESISTOR 4
  • 1206 RESISTOR 4
  • 1206 CAPACITOR 4
  • 1206 MELF DIODE 4
  • SOIC 14 2
  • QFP100 14x20 2
  • PLCC 20 2

Cost: (minimum order 5 kits)

1 - 49 $36.00 per
50-99 $32.00 per
100+ $29.00 per

Optional: We offer a JSTD-001 student training guide to accompany this soldering kit. This is a 20 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding). All IPC test answer sheets and practice questions along with workmanship evaluation forms and course evaluation are all included.

1-49 $45.00
50-99 $30.00
100+ $25.00

CTI-7711 IPC-7711 Training Kit

IPC Certified 7711 Solder Training Kit. Training kit includes all required components for IPC7711 Certified IPC Specialist training.
Parts packaged in ESD protective packaging to promote proper ESD prevention procedures.
Includes two completed circuit board

Components / QTY

  • Board 2
  • 1/4 Watt Resistor 18
  • 14 Pin DIP 9
  • Capacitor With Standoffs 18
  • Transistors With Standoffs 18
  • 0603 Capacitors 18
  • 0805 Capacitors 18
  • 1206 Resistors 18
  • SOIC 14 12
  • 1206 MELF Diode 12
  • SOT 23 18
  • PLCC 28 12
  • LQFP44-T30 (10x10) 6
  • LQFP100-T20 (14x14) 6

Cost: (minimum order 5 kits)

1 - 49 $73.00 per
50-99 $67.00 per
100+ $60.00 per

Optional: We offer a 7711 student training guide to accompany this soldering kit. This is a 20 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding). All IPC test answer sheets and practice questions along with workmanship evaluation forms and course evaluation are all included.

1-49 $25.00
50-99 $20.00
100+ $17.00

CTI-7711-LF IPC-7711 Training Kit with Lead Free Parts and Board

IPC Certified 7711 Lead free Solder Training Kit. Training kit includes all required components for IPC7711 Certified IPC Specialist training.
Parts packaged in ESD protective packaging to promote proper ESD prevention procedures.
Includes two completed circuit board

Components / QTY

  • Board 2
  • 1/4 Watt Resistor 18
  • 14 Pin DIP 9
  • Capacitor With Standoffs 18
  • Transistors With Standoffs 18
  • 0603 Capacitors 18
  • 0805 Capacitors 18
  • 1206 Resistors 18
  • SOIC 14 12
  • 1206 MELF Diode 12
  • SOT 23 18
  • PLCC 28 12
  • LQFP44-T30 (10x10) 6
  • LQFP100-T20 (14x14) 6

Cost: (minimum order 5 kits)

1 - 49 $90.00 per
50-99 $80.00 per
100+ $70.00 per

Optional: We offer a 7711 student training guide to accompany this soldering kit. This is a 20 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding). All IPC test answer sheets and practice questions along with workmanship evaluation forms and course evaluation are all included.

1-49 $45.00
50-99 $30.00
100+ $25.00

CTI-MTK Mixed Technology SMT and PTH Solder Training Kit

SMT and PTH Mixed Technology Solder Training Kit. Training kit has all the common PTH and surface mount components to allow the beginner solder-er to develop soldering skills and the advanced solder-er to further develop their skills.

Parts packaged in ESD protective packaging to promote proper ESD prevention procedures.

Components / QTY

  • Mixed Technology PCB (SST-MIX1C) 1

Through-Hole Components

  • 1/4 Watt Resistor 10
  • 1/2 Watt Resistor 5
  • Diode 5
  • 16 Pin DIP 4
  • Radial Capacitor with Standoff 5
  • Radial Transistor with Standoff 5
  • Axial Electrolytic Capacitor 5

Surface Mount Components

  • 0805 Resistor 12
  • 1206 Capacitor 27
  • 6032 Tantalum Capacitors 8
  • SOIC14 18
  • SOIC16 12
  • 1206 MELF Diode 12
  • SOT23 8
  • PLCC44 1
  • PLCC68 1
  • QFP64 1
  • QFP120 1
  • SOLIC20 8

Cost: (minimum order 5 kits)

1 - 49 $60.00 per
50-99 $52.00 per
100+ $48.00 per

Optional: We offer a Mixed Technology student training guide to accompany this soldering kit. This is a 30 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding). Component Identification, PTH and SMT rework procedures and other related information included as well as a course evaluation form to allow student feedback about your solder training program.

1-49 $55.00
50-99 $40.00
100+ $35.00

CTI-MTK-LF Mixed Technology SMT and PTH with Lead Free Parts and Board

SMT and PTH Mixed Technology Solder Training Kit. Training kit has all the common PTH and surface mount components to allow the beginner solder-er to develop soldering skills and the advanced solder-er to further develop their skills.
All parts and components lead free.
Parts packaged in ESD protective packaging to promote proper ESD prevention procedures.
Includes one completed circuit board for removal skills and one unassembled circuit board and all the components for the assembly skills.

Components / QTY

  • Mixed Technology PCB (SST-MIX1C) 1

Through-Hole Components

  • 1/4 Watt Resistor 10
  • 1/2 Watt Resistor 5
  • Diode 5
  • 16 Pin DIP 4
  • Radial Capacitor with Standoff 5
  • Radial Transistor with Standoff 5
  • Axial Electrolytic Capacitor 5

Surface Mount Components

  • 0805 Resistor 12
  • 1206 Capacitor 27
  • 6032 Tantalum Capacitors 8
  • SOIC14 18
  • SOIC16 12
  • 1206 MELF Diode 12
  • SOT23 8
  • PLCC44 1
  • PLCC68 1
  • QFP64 1
  • QFP120 1
  • SOLIC20 8

Cost: (minimum order 5 kits)

1 - 49 $67.00 per
50-99 $62.00 per
100+ $56.00 per

Optional: We offer a Mixed Technology student training guide to accompany this soldering kit. This is a 30 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding). Component Identification, PTH and SMT rework procedures and other related information included as well as a course evaluation form to allow student feedback about your solder training program.

1-49 $55.00
50-99 $40.00
100+ $35.00

CTI-PTH Bulk Package Pin Through Hole Solder Training Kit

This solder training kit is designed to allow the beginner to develop his soldering skills and the experienced solder-er to refine and demonstrate his expertise.

The training kit board is designed in two sections: The left 2/3rds is designed for practice installations and removals and includes many common PTH components. The right 1/3rd is designed as a functional circuit and can be used to assess soldering workmanship, use of spacers, understanding of polarity and orientation, etc. The functional side can be separated from the practice side at the provided score line.

Component Type / Number of Components

Practice Components

  • Axial 1/4 Watt Resistors 15
  • Axial 1/2 Watt Resistors 5
  • Axial 1 Watt Resistors 5
  • Axial Leaded Diodes 5
  • Axial Polarized Capacitors 5
  • Horizontally Mounted Radial Leaded Caps 5
  • Vertically Mounted Radial Leaded Caps w/Spacers 5
  • Can Type Transistors w/Spacers 7
  • 16 Pin DIPS 5

Functional Circuit

  • ED's (various colors) 6
  • 2n2222 Can Type Transistors 6
  • Transistor Spacers 6
  • 1 µ farad Polarized Capacitors 6
  • 9 Volt Battery Cable 1
  • 470 ohm 1/4 Watt Resistors 6
  • 39K ohm 1/4 Watt Resistors 6

Cost: (minimum order 5 kits)

5 - 10 $50.00 per
11-50 $45.00 per
51+ $40.00 per

Optional: We offer a PTH Rework student training guide to accompany this soldering kit. This is a 20 page professionally bound student guide covering basics of soldering (melting points, inter-metallic bonding), acceptance criteria as defined by IPC, product classifications, introduction to soldering, axial and radial components as well as DIPS and ground plane thermal challenge removal/replacement along with tip selection, tip care and component identification and polarity recognition. A course evaluation and contact form are including as well to give the instructor feedback on this program.

1-10 $45.00
11-50 $40.00
51+ $35.00

CTI-PTH-2 Indivdual Package Pin Through Hole Solder Training Kit

PTH Solder Training Kit. Training kit has all the common PTH to allow the beginner solder-er to develop soldering skills and the advanced solder-er to further develop their skills.
Parts packaged in ESD protective packaging to promote proper ESD prevention procedures.
Includes one completed circuit board for removal skills and one unassembled circuit board and all the components for the assembly skills.

Components / QTY

  • PWB 2
  • Bifurcated Terminals 15
  • Gold Solder Cups 15
  • Hook Terminals 15
  • Pierced Terminals 15
  • Turret Terminals 15
  • Diodes 10
  • Electrolytic Capacitors 4
  • Capacitors with Standoffs 20
  • 1/4 Watt Resistors 20
  • 1/2 Watt Resistors 12
  • 16 Pin DIPS 6
  • Transistors with Standoffs 14
  • 16 Pin SOLIC's 4
  • 20 AWG Wire 10 ft.
  • 22 AWG Wire 10 ft.
  • 26 AWG Wire 10 ft.
  • Rev.10/02 - Contents subject to change

Cost: (minimum order 5 kits)

1 - 49 $48.00 per
50-99 $44.00 per
100+ $40.00 per

Optional: We offer a PTH student training guide to accompany this soldering kit. This is a 30 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding). Component Identification, PTH procedures and other related information included as well as a course evaluation form to allow student feedback about your solder training program.

1-49 $35.00
50-99 $30.00
100+ $25.00

CTI-PTH-LF Pin Through Hole Lead Training Kit with Lead Free Parts and Board

Not Available at this time

Cost: (minimum order 5 kits)

1 - 49 $58.00 per
50-99 $48.00 per
100+ $40.00 per

Optional: We offer a PTH student training guide to accompany this soldering kit. This is a 30 page professionally bound student guide covering basics of soldering (melting points, intermetallic bonding) including lead free information. Component Identification, PTH procedures and other related information included as well as a course evaluation form to allow student feedback about your solder training program.

1-49 $35.00
50-99 $30.00
100+ $25.00

CTI-J001-OTK Terminal and Wire Kit

Normally purchase with the CTI-JSTD kit. The standard terminal types are Turret, Gold Cup, Pierced, Bifurcate, and Hook. The wires are all stranded and the wire sizes are easily identified by color. All of the materials are available in Lead Free as well as Tin Lead finish and they can be purchased individually or in kit form.

Cost: (minimum order 5 kits)

1 - 49 $12.00 per
50-99 $11.00 per
100+ $10.00 per

From The CTI Blog

Options

If you do not find the solder training kit you need or would like to discuss training options please feel free to contact us.

Circuit Technology, Inc.
340 Raleigh Street
Holly Springs, NC 27513

(919) 552 3434 Phone

(919) 552 2772 Fax

sales@circuittechnology.com